Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer

Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer

Launch X-431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer

X-PROG 3 is an advanced immobilizer & key programmer. Has a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

  • We are a seller of OFFICIAL LAUNCH Diagnostic tooling
  • FREE WORLD WIDE SHIPPING
  • Global Version WITHOUT IP Restrictions
  • 2 years free software updates
  • 2 years warranty from activation
  • All languages supported for free
  •  Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
  • Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
  • Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
  • Reads & writes most Engine/Gearbox ECUs without disassembling the shell.

The Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer is an accessory unit and CANNOT work stand alone. It must be used in conjunction with, and is Compatible with:

  • X-431 PRO GT
  • X-431 PRO V4.0
  • X-431 PRO 3 V4.0
  • X-431 PRO 5
  • X-431 PAD III V2.0
  • X-431 PAD V
  • X-431 PAD VII

Launch X-431 GIII X-Prog 3 Main Functions:

  1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
  2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
  3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
  4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
  5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
  6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
  7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
  8. Supports the BMW CAS4/CAS4+ module replacement.
  9. Supports the ECU cloning and replacement for BMW Siemens engines.
  10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
  11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

 

Launch GIII X-Prog 3 Advantages:

  1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
  2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
  3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
  4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
  5. Supports BMW E chassis 8HP gearbox ECU reprogramming to Virgin.
  6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU). MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
    2) Added ECU reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.

Launch GIII X-Prog 3 Supported Chip Brands:

It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.


Atmel, NSC, Fujitsu, Phillips, Infineon, Renesas M16, M32, M32R, R32C, R8C, V850 SPI, V850 UART, Motorolla MC68HC05, MC68HC08, MC68HC11, MC68HC12, MediaTek, Microchip, Nordic, ST, Samsung, SiLabs


Supported EEPROM Brands:

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.

4Wire, GI, Numonyx, SST, Adesto, Gigadevice, OKI, ST, AKM, Grundig, ON Semi, Toshiba, Altera, HOLTEK, Other, Winbond, Amic, Nynix, PCT, Xicor, Atmel, I2C, Phillips, xUSSR, Bosch, ITT, Pioneer, YMX, Catalyst, KHIC, PMC, Spansion, Chingis, Macronix, Ramtron, SPI, Dallas/Maxim, MicroChip, Rohm, NEC, EON, Micron, Samsung, NSC, ESMT, MicroWire, Seiko, Ford, EXEL, Mitsubishi, Siemens, Fujitsu, Fairchild, Motorola, Sony.

 

  1. DB26 diagnostic connector: To connect with all anti-theft/immobilizers
  2. Benz key slot: To place Benz car key.
  3. Key slot: To place car key for RF defection.
  4. Key chip slot: To place key chip.
  5. Power indicator. Red light indicates faults. Orange light indicates functions normally.
  6. Valve: To tighten loose EEPROM board.
  7. EEPROM slot: To insert EEPROM board
  8. DC input
  9. DB15 diagnostic connector: To connect with main diagnostic cable.
  10. 10. EEPROM/MCU pin out adapter slots for pcb direct connection

 

Hardware Specifications 

Launch X-431 GIII X-Prog 3

  Interface

 DB26, DB15

  Input power

 DC12V

  Working current Max

 500mA

  Power consumption

 5W

  Storage temprature

 -20℃~70℃

  Working temprature

 0℃~50℃

  Dimensions

 228x120 mm

 

 

Supported languages:

English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkey, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Farsi, Romanian, Serbian, Finish, Swedish, Czech.

 

Launch X431 GIII X-PROG 3 Package List:

  1. 1 x Launch X431 GIII X-PROG 3 main unit
  2. 1 x Power adaptor
  3. 1 x Main diagnostic cable
  4. 1 x Fourth-generation data acquisition cable
  5. 1 x Fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
  6. 1 x BENCH mode cable
  7. 1 x MCU converter V1
  8. 1 x MCU converter V2
  9. 1 x MCU cable with multiple leads
  10. 1 x EEPROM chip adaptor
  11. 1 x Benz infrared analog acquisition key
  12. 1 x MCU cable with multiple leads
  13. 1 x EEPROM converter
  14. 1 x User Manual